1. Decide what to cover first
Start with the rows residents ask about most, usually the ones closest to buildings. Decide whether spaces will be assigned, leased or included in rent, because that affects layout and signage.
2. Get a site plan or survey
A current survey or as-built shows buildings, drive aisles, parking, light poles, drainage inlets and easements. If you do not have one, an aerial image and photos are a start.
3. Locate underground utilities
Call 811 before drilling. Carport foundations are drilled or excavated, and water, sewer, gas, electric and communication lines run through many apartment parking lots.
4. Keep fire lanes and accessible parking intact
Local fire officials set minimum widths and clearances. Accessible stalls need adequate clearance too, including vertical clearance for van access. Confirm both with your architect or jurisdiction.
5. Plan drainage and lighting
Decide where roof runoff goes. Check whether existing poles stay or whether lighting should be mounted on the new structure.
6. Check permits
Most cities require plan review for a structure. The path depends on the jurisdiction. We send submittals before installation to support your review.
7. Phase the installation
Work by row or by building so only part of the lot is out of service at a time. Agree the schedule and notices with property management before starting.
Read more about our retrofit carports or send your site plan.
